• Sterk assortiment
  • Ruime voorraad in Nederland
  • Snelle levering
  • Franco vanaf €500
Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver
Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver

Orico Hard Drive housing USB 3.0 / Aluminum / M-SATA / SSD / Micro-B / Screws / Silver

€--,--
Excl. tax
18 In stock

Use your mSATA SSD drive as an external enclosure with this handy aluminum housing for mSATA SSD drives. This mSATA enclosure supports SSD drives with a maximum capacity of 2 TB.

Buy 10 for €--,-- each and save 5% Buy 25 for €--,-- each and save 8%
Brand: Orico
Article number: ORI-MSA-U3
EAN: 6954301155331

Use your mSATA SSD hard disk as an external hard disk

Use your mSATA SSD drive as an external hard drive with this handy aluminum housing for mSATA SSD drives. This mSATA enclosure supports SSD drives with a maximum capacity of 2 TB. Thanks to the fast USB 3.0 Micro B port and the support of both SATA 2.0 and SATA 3.0, this enclosure can reach speeds of up to 5Gbps. With the included USB 3.0 cable you can easily connect the mSATA enclosure to a free USB port of a Laptop or Desktop.

Support

The mSATA enclosure from Orico supports Hot Swap, Plug & Play, UASP, SATA 2.0 and SATA 3.0.

Lightweight mSATA housing

With a weight of only 40 grams, this external hard-drive case is no problem to travel with. The thickness of the housing is only 11mm so that it fits in almost all types of bags, including your pocket.

Protect your SSD drive

By using this Orico aluminum housing you are sure of a high degree of protection of your mSATA SSD drive. Free from dust and scratches and of course from a fall.

Easy to install

The installation of your own SSD hard disk is no problem at all. Open the front panel with the supplied screwdriver and remove the PCB from the housing. Now click the SSD into the mSATA interface and slide the PCB back into the housing. Tighten the screws again and the disc is ready for use.

Specifications

Orico

Adres Orico NL Molendwarsstraat 66 7391 ZS Twello
Contact +31(0)571 700 504 info@orico.shop Werkdagen van 9:00 tot 17:00 uur