Ruime voorraad in Nederland
Franco vanaf €500
Hard disk enclosure for NVMe M.2 and SATA M.2 SSD - 10Gbps
Do you have the latest technology in the field of data storage, but you don't have the right housing yet? Then you can consider our new Orico M.2 SSD housing. Combined with a unique transparent design and the latest technology, this is exactly the product you need. Unique to this external hard drive enclosure is that it supports two protocols. This way you can not only place an NVMe M.2 SSD, but also a SATA M.2 SSD in this housing. The housing is suitable for drives up to 2TB.
Dual protocol: NVMe M.2 and SATA M.2
This brand new housing from Orico supports two protocols. You can not only place an NVMe M.2 disk, but also a SATA M.2 SSD. This means that you no longer run into problems such as: too many specifications and the wrong protocol, that the old enclosure no longer works after the hard drive is upgraded and that the poor compatibility results in transmission delay.
Extremely fast data transfer
The Orico NVMe / SATA M.2 SSD external hard drive enclosure has the latest 10Gbps USB 3.1 Gen2 Type-C interface. This results in very fast data exchange like never seen before. This way, high-quality images, VR technology and other large files can be exchanged quickly and easily.
M.2 interface VS MSATA interface
The M.2 interface is another alternative to the MSATA interface developed by Intel. The reading and measuring speed of the M.2 interface can be up to 992 MB / s. The size of the M.2 interface is also different from that of the MSATA interface. The M.2 interface is only 2.75 mm thick and therefore a lot smaller than the MSATA.
Versatile in use
Thanks to the different screw holes, the housing can be used for different types of NVMe M.2 / SATA M.2 drives. It is possible to install the following drives: 22x30, 22x42, 22x60 and 22x80. Check in advance whether your drive fits in this dual-protocol enclosure.
Compatible with PCIe NVMe M.2 M Key SSD with 2280, 2260, 2242, 2230 form factor: Samsung 950 Pro, PM951, PM981, SM961, 960 EVO, 960 Pro, 970 EVO, 970 Pro, WD Black, ADATA XPG, Corsair Force, Crucial, Intel Optane memory 600P, 760P, 900P, Toshiba OCZ RC100, Patriot, SK Hynix, Kingston, Mushkin Pilot, DREVO D1 XTREME Z370.
Examples of suitable NVMe M.2 SSD drives:
ADATA SPECTRIX S40G
ADATA SX6000 Lite and PRO
ADATA SX8200 PRO
ADATA XPG GAMMIX S5 / S11 PRO
ADATA XPG SPECTRIX S40G
KINGSTON S-A1000-M8 NVME 240/480/960 GB.
ORICO TROODON V500 SSD Series
VGEN HYPER NVME M.2 Series NV256VHY
SAMSUNG 950 PRO / SM961 (OEM)
SAMSUNG 960 PRO
SAMSUNG 970 EVO and EVO PLUS
WD BLACK PCI-e NVME SSD
WD BLUE SN500 NVME SSD
The dual protocol also allows you to place M.2 SATA SSD writes.
Examples of suitable SATA M.2 SSD drives:
1: Press and slide the back cover open.
2: Align the slot and insert the hard drive (not supplied).
3: Lock the screw on the back and attach the drive.
4: Place this in the housing and close the back cover.
Easy to connect to your phone / laptop
Connect the SATA / NVMe M.2 SSD housing to phones that have a Type-C interface such as the Huawei and the Meizu to easily increase the writing space. A number of Samsung smartphones also have the Type-C interface. Examples include the Samsung Galaxy S8 series, S9 series, S10 series and the Galaxy Note8 / Note9, the Huawei Mate 10 series, Mate 20 series and P20 series.
The M.2 SSD enclosure can also be used with: Apple 12 ”MacBook, MacBook Pro, MacBook Air, Huawei MateBook, MateBook X, MateBook E, Mi 12.5” Air, Mi Gaming Notebook, ASUS ZenBook series / ROG series, Lenovo Yoga 5 / ThinkPad XI, Dell XPS Series, Razer Blade and Software Surface 2.
Ultra-thin transparent design with sleek finish
The NVMe M.2 housing is made of aluminum and transparent polycarbonate, which has a number of advantages. This way your hard drive is protected at all times against disturbances but also against overheating. This results in the best performance of your NVMe M.2 / SATA M.2 drive. The transparent design makes it a very unique housing where you can see all components. The housing is equipped with an LED indicator and has an automatic sleep mode after 10 minutes.
In addition to the housing, the following is included:
1x USB 3.0 Type-A to USB-C 3.1 cable. (5Gbps, applicable for PC)
1x USB-C 3.1 to USB-C 3.1 cable. (10Gbps, applicable for laptop and USB-C phone)
1x bag of screws.
1x user manual.
✔ Product code: ORI-TMC2M.
✔ Type: dual protocol NVMe M.2 / SATA M.2 SSD enclosure.
✔ Material: aluminum and polycarbonate.
✔ Output interface: USB 3.1 Type-C.
✔ Transfer speed: 10 Gbps (NVMe) and 6 Gbps (SATA)
✔ Chip: RTL9210B (10Gbps).
✔ Supports: UASP and TRIM protocol.
✔ Supporting capacity: 2TB.
✔ Power supply: Type-C power port.
✔ Installation: screws.
✔ No driver needed.
✔ Supports: Windows, Mac, and Linux.
✔ Color: transparent and blue aluminum plate.
✔ LED indicator: yes.
✔ Includes A to C + C to C cable.
✔ Weight: 28 grams.
✔ Product dimensions: 108mm x 34mm x 11.5mm.